E-Clutch™
No More Dumping Excess Water.
On certain job sites water can be a precious commodity, so conserving it is a key to being on the bid list. NLB’s new E-Clutch and Esync systems allow you to have all the water you need, where and WHEN you need it, and none when you don’t.
This new technology, exclusively available from NLB, disengages the pump from the engine immediately cutting off the flow of water. And it can be remotely controlled when paired with the new Esync™ line of wireless or wired tooling, putting the operator far away from the water jetting worksite.
What are the benefits?
- Increased Safety
- Less operator fatigue
- Removes operator from the high-pressure water worksite
- Environmental Impact
- Less water on the ground, which is important where regulations restrict or mandate low/no water run-off into sewers or watersheds
- Water conservation
- Cost Savings
- Lower water costs
- Eliminates complex system valving
- No cartridges for service/re-build on accessories
- Eliminates the PTO
Contact our team of experts today to learn more about our E-Clutch and Esync capabilities.
PTO Eliminated
The day-to-day struggles of manually disengaging the clutch are officially over. The E-Clutch completely removes the PTO from the unit along with its related service and maintenance costs.
Esync™ Wireless Technology.
NLB’s exclusive Esync™ system is a major step forward in water jet technology, dramatically improving operator safety and convenience while almost eliminating wasted water. The core of this advanced technology is our clutch system — the NLB E-Clutch™ — that lets the operator of an NLB water jetting unit immediately stop the flow of high-pressure water. The E-Clutch actually disengages the pump from the engine, completely eliminating the need for a dump valve — cutting cost, complexity and risk to the operator.
Combining an E-Clutch with Esync accessory tools, all wirelessly connected, allows an operator remote water jetting control. These tools include a specially-configured NLB hand lance, foot control, and a hand-held control pendant. From up to 600 feet away, all accessories command the engine to reduce the RPM then disengage the clutch, or increase the RPM then engage it. Every accessory uses a lithium ion battery that has 32 hours life of continuous use (900 MHz) with a 6-8 hour re-charge time. Wireless accessories can also be run by wire if the operator forgets a charger or a spare battery. When wired, the battery will self-charge during use.
Incorporating Esync Technology into your E-Clutch unit couldn’t be easier. All E-Clutch units are equipped with a second control box that’s pre-drilled and pre-wired for your Esync receiver. Simply mount the receiver and turn it on. With the flip of a switch, you’ll be able to link your accessory, then you’re ready to go!
Hand Lance
Dual-trigger functionality acts as a momentary switch – engaging/disengaging the pump with fingertip control.
Foot Control
Safely engage the pump with the push of a pedal, keeping high-pressure hoses away from your feet.
Pendant
This lightweight pendant remotely forces the E-Clutch to engage/disengage with a simple push of a button.
40-1000-15 and 40-1050-10 SpinJet
Self-rotating 40,000 psi (2,800 bar) lightweight SpinJet®s that engage the E-Clutch with the throttle.
Curb Cleaner
Our newest high-pressure water jetting accessory can adjust to clean a wide range of curb profiles, and engages the E-Clutch with the throttle.
Social Media
TwitterFacebookYoutubeLinkedinInstagram